New WOL3D Creality CR Scan 01 3D Scanner

I have used the printer only once by printing the cat model that came on the SD card.Positive points:1) I was able to assemble in less than 3 hours using the one page assembly instructions. Later I saw many videos so I would advise watching a few videos before assembling especially if you are a non technical guy like me2) The print came out really well. The finishing is very nice and I am satisfied with it given the price point.Negative points:1) The name says 2022 model with resume facility on power failure. The version of the software is actually of 2021 so one should not confuse this printer with the Ender 3 V2 that has the latest display screen. It costs a few k more I understand.2) I was told that there would be an email for virtual demo. I have yet to receive any communication on that.3) The sample filament that came with the printer is very less. I had no idea about how large the cat model is. I started printing and realised that the filament is not enough. Ended up with an incomplete print in the very first run! I would recommend buying a filament spool along with the printer itself.But overall I am satisfied with the quality of the materials as well as the print.

PROS:1. Nice printer for the price range.2. Easy to assemble since.3. The first print came up quite nicely using the models provided in the SD card that came with the printer.4. Came with v-slot cover which is quite useful and adds some color to the printer.5. Easily upgradable.6. Using the magnetic bed came with printer, adhesion was good enough and prints came off quite nicely in the start.CONS:1. The bed is slightly warped in the middle. So whenever you are tramming the bed, it would look fine on corners and the minute you go to the middle the nozzle is too close. And if you adjust it on middle the nozzle will be too far when it moves out from middle. Which I fixed initially using some tape under the magnetic top bed.2. Print bed is not a good quality one. After few prints the top layer in the magnetic bed started coming off with the prints creating small black dots in the print.SO.... if you are ready to shell out some more money on a BL Touch/CR Touch sensor and/or a glass bed. This is a good printer.

I've been using this WOL 3D Creality Ender 3 Pro model for over a year now.The 3D printer came in a Semi assembled form (means all the electronics were already assembled on the base... we just have to raise the pillars and it's attachments. It was easy to follow the instructions sheet in the beginning and most part of it... but few steps were tricky. I would suggest people to watch Assembly videos online when assembling, especially the printing head.Magnetic Surface Plate is good. It doesn't need any extra clamping and its flexible enough to easily remove the prints. The temperature is consistent through out the surface. The surface plate gets to the required temperature within 3-5 mins.We any power cut happens, the Resume Print function works well too... Just make sure to stick masking tape to the base so that the print doesn't come out.The SD card provided contains the easy-to-use 3D printing Cura software and a couple of 3D models to test the printer after assembling.The software to is easy to understand and use. Lots of YouTube videos are available for understanding the software too. It would be good if the software highlights if any discrepancies are present on a 3D Scanned models.The only time taking process is levelling the surface plate. Take as much time as required to level it to get a great print.The Customer support is also commendable as they are resolving any issues we face instantly or at the earliest.In short - Good printing quality, reasonable cost for the beginners and good performance for the enthusiasts.P.S. Place the printer in a ventilated area when using ABS filament and follow the temperature settings mentioned on the spool for any type of filament you buy.I'm planning to get the self-levelling and laser module next for my WOL 3D Creality Ender 3 Pro model.

The media could not be loaded. After using this product for 3-4 days, this is my experience. The product is good quality, everything required was in the box. Quick and easy delivery by Amazon as always. Assembly was easy and we'll instructed in videos provided in the SD card. Now let's see the cons.The printer was in good shape and worked straight away. The problem was the built plate. It is warped in the middle. So even after leveling all 4 corners perfectly with the paper test, the center still rubs hard against the nozzle.Now I spent 2 days trouble shooting it, from what I found, the actual bed is perfect only the built plate is warped. So as anyone would do, I contacted Wol3D for help. Now here's how it went.The first thing they said after I explained them the problem was "Warping is not possible". And their solution was using glue sticks. From this I understood, these people have no idea of what the are talking about.After providing the video(added in this review) demonstrating the problem, they asked me to make a hole in the center to let out air. Now this is reenforced fiber bed, you can't just use a pin to make hole in it. I did contact offical group of Creality for suggestions and there they asked me to replace the plate as making a hole was not the solution.So obviously I asked for a replacement bed. And these people straight up blamed me for warping the bed. After some talk they said the bed was not under warranty and they can't help me.So now I have ordered a new bed from other seller.My advice to you is, buy from a better seller. These people don't know anything about 3D printing.