Car Battery Terminal Connectors, 2 Pcs 4 Way Quick Release Disconnect Car Battery Terminal for SAE/JIS Type A Posts, Compatible With Cars, Vans, Trucks and More

I bought these for a project car that doesnt get driven much and has a slow drain. This made the disconnecting process much easier. Not that loosening a bolt is hard, but if youve done it long enough you know the bolts tend to find their way into the lead on the standard connectors, get boogered up, and the connector itself gets stressed and cracks. These probably will over time, but again, more simple. Also good for projects and boats because of the accessory wire mounts. Cleans up the look a bit, and beats having a stack of eyelet connectors sandwiched behind the normal nut or bolt lol.Would recommend using locktite on those bolts and the main wire clamping bolts though. They seem like they will back out with vibration kinda easy.

The media could not be loaded. I used this for my 2003 Jeep Grand Cherokee Laredo since the old terminals I had constantly would corrode and it fits perfectly. The packaging concerned me a bit since the screws were loose in the packaging but thankfully everything was still in tact and I had no missing items. It was very easy to install as well. I love the look of the battery terminal wire connection, it gives my car battery a more professional and sleek look. The connector is also very durable and there were no issues in the product being easily damaged during installation. The connectors were also very easy to remove which is the main reason why I bought these. On the pictures, I have the old battery terminals, the new battery terminals after two months since installation, and the opening of the packaging I received. Overall I am very satisfied with this product, have had no issue with corrosion, and it’s very easy to remove!

Pretty sure they're gold plated zinc. You get what seems like a lot of stuff, but don't get too excited. The included wire terminals are for maybe 12 AWG and not great quality. The terminal cleaning wire brush isn't an expensive item to buy on it's own. The terminal screws could be stainless, but they are magnetic. The magnetic types of stainless steel are also usually not as corrosion resistant as non-magnetic ones. The primary cable connection for these is adequate. I used a nail nearly as large as the threaded opening, inserted from underneath to corral the bare wires inside the clamping section intended for them. I then used the Allen head screw to push the nail out of the way as I directed the Allen head screw into the threaded side. That group of wires combines into at least 0000 AWG, probably 5/8", and these connectors can handle it. Having the additional wiring locations is nice. I do plan to cut off those that I don't use, otherwise I have concerns that these terminals might be a little too large in some vehicles. At least remove any screws not being used and check carefully for unexpected contact points below this connector.Update: I like it better after actually installing it. The Allen head screws (5mm key) allow for pretty darn good clamping down of bare cable wires and ring terminals. The cam arrangement provides good clamping to top mounted battery terminals. On Amazon, Uxcell offers a pair of nice red and black covers that fit these as well, with provisions for the entrance of the two additional ring terminal cables per each, like they were made for use with these battery terminal connectors (B07X46DBTD). Be sure to assemble things with those included to begin with and avoid doing that twice.Rather than leaving my original notes above, I corrected statements to reflect my actual findings thus far.

These are an excellent replacement parts. The clamp design echoes military specs' philosophy of simple, rapid repair/replace.. Inclusion of the Allen wrench is a huge plus, and the inclusion of the post cleaning tool is a nice bonus. Two notes of caution: for the vendor I chose, they arrived in a box with some of the screws being loose in the box, so be careful in opening the box, or you'll spend more time finding dropped screws than the installation will take. Also, be sure to adjust the tension with the little red knobs to set the proper clamping force.

Not solid brass. But great price, and came with a terminal/post brush and a few other doodads.

These work well and great when needing additional power wires. They are very light and feel cheaply made, but they work. Not bad for price.

I have an older vehicle and my battery terminal connections were crap! They basically would move around while hitting bumps in the road and eventually not be snug on my battery anymore. This lead to issues on start up. I would constantly have to open the hood to readjust the connector.I got this to fix this problem, and it did just that.You can be afraid to work with wires if you are going to buy this though, Fair warning!It was easy enough to snip the old connectors off, then strip some of the wire-cover and get it into these new connectors. Just cut off the minimum you need to get off the old connectors, and it should in most cases work.Once I got the wires properly on the new connectors, it was super easy to mount, and adjust the quick release levers to be nice and snug. Since then I have not had connectivity issues.For me it is a bit overkill, as I this connector was actually designed for people who need to add extra connections to the battery. Each connector has about 2 more slots for wire (like if you were doing something with the sound system where you need a separate wire to the battery). Its cool that I can do that now, but I never will. All that was important is that it was nice and snug, and its easy to take on and off while servicing my vehicle.Well worth it to me.